TORCH FURNACE CO.,LIMITED

industrial heating e(4)
manufacturer and who(16)

Showing 1 - 10 of 20, total 2 pages [First] [Previous] [Next] [Last]

straight l type mosi2 heatingn elements
Specification: Straight L type
Detail: Installation of elements 1. Vertically Hanging Under normal temperature,MoSi,element is very brittleness,while under high temperature it is plasticity.So,the better way for installation if the UShape element is to hang it ve...

l type mosi2 heating elements
Specification: L type
Detail: model: MoSi2 heating element -Bend Type Order sample: d=6mm, c=12mm, Le=200mm, Lu=180mm, a=30mm Please specify as: dia6/12x200x180x30mm (dia d/cxLexLuxa mm) d = the diameter of hot zone c = the diameter of cold zone L...

double hot zone sic heating elements
Specification: Double hot zone type
Detail: Order sample: OD=20mm, HZ=150mm, CZ=100mm, OL=600mm, Resistance=1.5ohms. Please specify as: dia20x150x600mmx1.5ohms When you place order, please tell us following data: a). Outer diameter (OD) b). Length of Hot zone (...

dumbbell type sic heating elements
Specification: Dumbbell type
Detail: Dumbbell heating elements consist of a hot zone with high electrical resistivity and are rigidly connected with two thickened cold ends of low resistance owing to their larger diameter and special manufacturing technique. ...

bend type molybdenum disilicide ceramic heating element
Specification: Bend type
Detail: model: MoSi2 heating element -Bend Type Order sample: d=6mm, c=12mm, Le=200mm, Lu=180mm, a=30mm Please specify as: dia6/12x200x180x30mm (dia d/cxLexLuxa mm) d = the diameter of hot zone c = the diameter of cold zone L...

rod type sic heating element
Specification: Rod/ ED type
Detail: Hot rods are made from quality SIC, which was also added to some additives according to the materials proportion. Silicon carbide electric heating elements are sintered non-metallic products of round section rod or tubular for...

slot type silicon carbide heating element used for furnace
Specification: Slot/UX type
Detail: Type:UX£¨slot£© Paremeter of UX type sic heating element: 1.Outer diameter:OD(mm) 2.Hot zone length:HZ(mm) 3.Cold zone ...

w type silicon carbide heating element used for industrial oven
Specification: w type
Detail: W type SiC Heating Elements with the terminals at one end, are designed for three-phase power source applications, such as the float glass process. Electrical CharacteristicsThe Yuhao Rod Heating element is a linear type re...

standard bulk u shape sic heater
Specification: U type
Detail: Yuhao U type sic heating Rod is manufactured by taking two carefully-matched SiC rods and uniting them with a silicon carbide bridge. These elements provide for wiring both terminals from one side of furnace. Ideal for drop-th...

costomizable gun type sic furnace heating element
Specification: Gun type
Detail: ***ailed introduction to gun-type silicon carbide heating element: Yuhao SIC u-type heating elements consist of two silicon carbide legs of equal diameter. Each leg is divided into two parts ,hot zone and cold end with a join...


Showing 1 - 10 of 20, total 2 pages [First] [Previous] [Next] [Last]
1 2